Chia Sẽ Kinh Nghiệm Về IT



Tìm Kiếm Với Google
-


Gởi Ðề Tài Mới  Gửi trả lời
 
Công Cụ Xếp Bài
Tuổi 15-10-2009, 09:24 PM   #1
hoctinhoc
Guest
 
Trả Lời: n/a
Mssql Replication!
Mssql Replication

For distributed databases, SQL Server 2005 provides comprehensive schema change (DDL) replication, next-generation monitoring capabilities, built in replication from Oracle to SQL Server, merge replication over https, and significant merge replication scalability and performance improvements. Additionally, the new peer-to-peer transactional replication feature improves support for data scale out using replication.

Replication is designed to increase data availability by distributing the data across multiple database servers. Availability is increased by allowing applications to scale out the SQL Server read workload across databases. SQL Server 2005 offers enhanced replication using a new peer-to-peer model that provides a new topology in which databases can be synchronized transactionally with any identical peer database.



Step I. Configure Distribution


First, you must connect to the SQL Server Distributor:

1. Open SQL Server 2005 Management Studio.

2. If you are not already connected to the instance of SQL Server that will serve as the Distributor, click Object Explorer and select the instance.


Figure 1. Connecting to the Distributor

After you have connected to the instance, start the New Publication Wizard.

1. Expand the server node.

2. Expand the Replication folder.

3. Right-click the Local Publications folder and then click Configure Distribution

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 776x367
Figure 2. Starting the Configure Distribution Wizard

4.The Configure Distribution Wizard introduction page is displayed.

Click Next


Figure 3. the Configure Distribution Wizard page

5.Verify that the instance that you are connected to is selected as the Distributor and click Next.


Figure 4. Specifying the Distributor

6.Specify Snapshot Folder This snapshot folder does not support pull subscriptions created at the Subscriber. It is not a network path or it is a drive letter mapped to a network path. To support both push and pull subscriptions, use a network path to refer to this folder.


Figure 5.Specify the Snapshot Folder

7.Specify Distribution Database .Locate the distribution database and log files.Click Next


Figure 6. specifying distribution database

8.Specify Publisher.Enable servers to use this distributor when they become publisher.click Next


Figure 7. Specifying publisher and distribution database

9. On the Wizard Actions page, you specify the distribution will be created, and whether the distribution configuration is saved in a script. We recommend that you select the check box for scripting so that you will have a copy of the distribution configuration for future reference. click Next.


Figure 8. Scripting and creating the distribution

10. specify the distributor of script ,Click Next.


Figure 9. Specify the distributor script

11. On the Complete the Wizard page, verify that all options are correct.Click Finish


Figure 10. Verifying wizard options

12. The Distribution Wizard now saves the configuration information that you have entered and creates the distribution.

Click Close after the steps are complete


Figure 11. Creating the distribution

13. Specifying the connection properties

Right-click the Replication folder and then click Distribution Properties

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 792x423
Figure 12. Specifying the connection properties

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 702x630
Figure 13. Saving the Distributor configuration


Step II. Create Publication
1.Specify the Publisher Properties and select Transactional Databases at this artical

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 706x628
Figure 15 staring the publisher properties

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 703x630
Figure 16.specifing the publication databases.

For more information about Transactional and merge,pls see "Troubleshooting Oracle Publishers" in SQL Server Books Online

2. After you have connected to the instance, start the New Publication Wizard.

A.Expand the server node.

B.Expand the Replication folder.

C.Right-click the Local Publications folder and then click New Publication

The rest of this section covers the steps in the wizard in more detail

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 791x461
Figure 17. Starting the New Publication Wizard

3. The New Publication Wizard introduction page is displayed.then click Next


Figure 18. New Publication Wizard introduction page

4. Choose the database U wanna to publish. Select the publication type and click Next


Figure 19.specifing the publication database

5. On the Publication Type page, you select the type of replication to use. Select Snapshot publication if you want all the published data to be copied every time replication executes. Select Transactional publication if you want to start by copying all the published data and then continuously stream subsequent data changes to SQL Server in near real time.

Note: For more information, see the topic "Transactional Replication Publishers" in SQL Server Books Online.

Select the publication type and click Next.

The rest of this article assumes that you selected Transactional publication.


Figure 20. Specifying the publication type

6.On the Articles page, select the tables that you want to publish from the Objects to publish list. If there are columns of data that you do not want to replicate, you can remove the columns from the published table by clearing the check box next to each column.

Note: A table can appear among the Objects to publish only if SELECT permissions for the table have been granted directly to the replication administrative user.


Figure 21. Selecting the tables to replicate

Note: If a column contains an MSSQL data type that might result in data loss when it is converted to a SQL Server data type, a yellow warning sign is displayed next to the column. In the following illustration, the HIREDATE column contains date data that might result in data loss. You can optionally select an alternative to the default SQL Server data type. First, access the properties for the published table.

A. Select the table in the Objects to publish list and then click Article Properties.

B. Click Set the Properties of Highlighted Table Article.

In the next step, you can select an alternative data type.


Figure 22. Accessing properties of published tables


Figure 23. Changing article types for Subscriber article

7.You can optionally specify that you require only a subset of the data to be published. To specify a filter for a table, you specify a WHERE clause using SQL-compliant syntax.

A. On the Filter Table Rows page, click Add.

B. In the Add Filter dialog box, select a table to filter from the list.

C. In the Filter statement text area, type a WHERE clause.

D. Click OK.

E. Click Next.


Figure 24. Filtering data

8.On the Snapshot Agent page, select whether you want to start creating snapshot data files immediately after the wizard finishes, or at a later time.

A. Select the option to create a snapshot immediately.

B. Click Next.


Figure 25. Scheduling the snapshot

9.The Snapshot Agent and Log Reader Agent pull data from the Publisher. On the Agent Security page, you specify the Windows user under which each agent should run.

Each user must be a member of the sysadmin fixed server role on the SQL Server Distributor.

Additionally, the Windows user under which the Snapshot Agent runs must have write permissions on the snapshot folder. By default, the snapshot folder is located at <drive>\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\repldata\.

A.Click Security Settings to specify settings for each agent. If you want to specify the same settings for the Log Reader Agent and Snapshot Agent, specify the Snaphot Agent settings first and then select Use the security settings from the Snapshot Agent.

B. Click Next.

10.On the Wizard Actions page, you specify when the publication will be created, and whether the publication configuration is saved in a script. We recommend that you select the check box for scripting so that you will have a copy of the replication configuration for future reference.

A. Select both check boxes.

B. Click Next.


Figure 27. Scripting and creating the publication

11. Create Publication Script File.click Next


Figure 28. CreatePublication sql script

12.On the Complete the Wizard page, you can verify that all options are correct, and provide a name for the publication.

A. Type a name for the publication.

B. Verify options, and click Back to change your selections if necessary.

C. Click Finish.


Figure 29. Completing the New Publication Wizard

13.The New Publication Wizard now saves the configuration information that you have entered and creates the publication. Click Close after the steps are finished.


Figure 30. Creating the publication

The publication that you created appears under the Replication folder in SQL Server Management Studio.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 659x468
Figure 31. Viewing the new publication

Step III.Verifying the Status of Replication Agents
1.If you configured the Snapshot Agent to start immediately as recommended, you can now verify the progress of the Snapshot Agent by using Replication Monitor. This section of the article describes how to configure Replication Monitor and how to view the status of the Snapshot Agent.

2.In SQL Server Management Studio, right-click the Local Publications folder and then click Launch Replication Monitor.


Figure 32. Starting Replication Monitor

3.The Publisher is now listed under the My Publishers node of Replication Monitor. The right pane of Replication Monitor is populated, but does not show any subscriptions to the publication at this time. You will create a subscription later in this article.

A. Expand the Publisher node ( in the diagram), and then select the newly created publication.

B. Click the Warnings and Agents tab.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 796x309
Figure 33. Viewing the new publication in Replication Monitor

4.Verify the status of the Log Reader Agent and the Snapshot Agent. If the status of either agent is incorrect, verify that SQL Server Agent is running and that the Windows user and password you specified for each agent are correct before you continue.

A. In the lower pane, titled Agents and jobs related to this publication, verify that the status of the Log Reader Agent is Running.

B. In the same pane, verify that status of the Snapshot Agent status is Running or Completed.

C. Double-click the Snapshot Agent row to open a dialog box that shows the history of the snapshot process.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 796x561
Figure 34. Viewing status of the Snapshot Agent and Log Reader Agent

5.In the Snapshot Agent dialog box, view the history of the snapshot process.

A. In the pane titled Sessions of the Snapshot Agent, verify that the status is Completed.

B. Close the Snapshot Agent dialog box

C. Close Replication Monitor.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 698x564
Figure 35. Viewing details of Snapshot Agent history

Step IV.Configuring Permissions for the Distribution Agent
Now that the publication has been created and the Snapshot Agent has been configured to pull data from the MS SQL database into a set of snapshot files, you will configure permissions for the Distribution Agent, which delivers changes to the SQL Server Subscriber. Make sure that there is a Windows user on the Distributor computer under which the Distribution Agent can run.

1.The snapshot files are stored in a snapshot folder. By default the snapshot folder is located at <drive>\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\repldata\. We recommend that you configure a Windows share for this folder. The Windows user that runs the Distribution Agent must have read permissions on the share. For more information about how to configure shares and assigning permissions to shares, see the Windows documentation.

The following illustration shows the default folder used by SQL Server 2005 replication for storing snapshots.

a. In My Computer, right-click the snapshot folder, and click Sharing and Security.

b. Select Share this folder.

c. Type a name and description for the share.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 794x719
Figure 36. Configuring snapshot folder properties

Configure the snapshot share so that the Windows user under which the Distribution Agent runs has read permissions to the folder:

a. Click Permissions.

b. In the Permissions for repldata dialog box, click Add and locate the Windows user under which the Distribution Agent runs.

c. Select the Read check box.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 793x727
Figure 37. Configuring permissions to the snapshot folder

2.The next step is to add the Windows user to the Publication Access List (PAL). The PAL contains all Windows users and groups that have permission to synchronize with the publication.

a. In SQL Server Management Studio, in Object Explorer, expand Replication.

b. Expand Local Publications, and right-click the publication.

c. Click Properties.


Figure 38. Accessing the Publication Properties dialog box

In the Publication Properties dialog box, make sure that the Windows user is listed in the PAL.

a. Click the Publication Access List page.

b. If the Windows user is not in the Publication access list pane, click Add.

c. Locate the user and click OK to add the user to the PAL.

d. Click OK to close the Publication Properties dialog box.

Note The Windows user must be a valid SQL Server login that is already associated with a database user in the publication database.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 700x631
Figure 39. Adding a user to the PAL

Step V.Creating a Subscription
This section of the article describes how to create a subscription to the publication you created with the New Subscription Wizard.

1. In SQL Server Management Studio, right-click the publication you created.

2. Click New Subscriptions.


Figure 40. Starting the New Subscription Wizard

3.The New Subscription Wizard introduction page is displayed.Click Next


Figure 41. New Subscription Wizard introduction page

4.On the Publication page, the publication you created is displayed and selected by default. Click Next


Figure 42. Selecting the publication

5.On the Distribution Agent Location page, select the location at which the Distribution Agents will run. If there are less than fifty Subscribers, we recommend the default of running the Distribution Agent at the Distributor.

a. Select Run all agents at the Distributor (push subscriptions)

b.click Next


Figure 43 Specifying the Distribution Agent location

6.On the Subscribers page, select the Subscriber instance that will receive the replicated data from the Oracle Publisher. You must also specify whether the Subscriber is another instance of SQL Server or a different type of database provider.

a. Click Add Subscriber.

b. Select Add SQL Server Subscriber.

c.Click Next


Figure 44. Adding a Subscriber

7.Specify the connection information for the SQL Server Subscriber.

a. In the Connect to Server dialog box, select the instance of SQL Server that will be the Subscriber.

b. Specify the authentication method that is used to connect to the Subscriber.

c. Click Connect to save the connection information.

Note: In the configuration used for this paper, the Distributor and Subscriber are on the same instance of SQL Server. Therefore the connection settings in the following illustration are the same as those shown earlier in the paper.


Figure 45. Specifying connection properties for the Subscriber

8.Next, you select the database on the Subscriber that will receive the replicated data. If the subscription database does not exist, you can create it by selecting New database.

a. In the Subscription Database list, select a database, or click New database.

b. (Optional) To add other Subscribers, click Add Subscriber and repeat the process. For each Subscriber, you must connect to a Subscriber and specify a subscription database.

c. Click Next.


Figure 46. Specifying a subscription database

9.The Distribution Agent Security page of the wizard lets you configure Agent security for each Subscriber that you have added, to ensure that the Distribution Agents have the correct permissions.

Click the browse button (...) for each Subscriber to open the Distribution Agent Security dialog box


Figure 47. Reviewing connection properties

10.In the Distribution Agent Security dialog box, select the Windows user that you configured before you started the New Subscription Wizard. The Windows user that you select must meet the following conditions:

a. The user is included in the PAL.

b. The user is a member of the db_owner fixed database role in the subscription database.

c. The user has read permissions on the snapshot share.

Specify the Windows user under which the Distribution Agent will run.

a. Type the SQL login account info.

b. Click OK to save changes and close the dialog box

c. On the Distribution Agent Security page, click Next.


Figure 48. Specifying Distribution Agent security

11.By default, the Distribution Agent runs continuously and delivers changes from the Publisher to the Subscribers as changes become available.

a. Verify that Run Continuously is selected in the Agent Schedule column.

b. Click Next.


Figure 49. Scheduling synchronization

12.Use the Initialize Subscriptions page of the wizard to specify how the publication is initialized. When the Distribution Agent first runs for a subscription, by default it delivers the complete snapshot of initial data to the Subscriber. This initialization occurs immediately after the New Subscription Wizard finishes.

a. If the Subscriber already contains all the initial tables and data, clear the Initialize option on the Initialize Subscriptions page.

b. Select Immediately in the Initialize When list to specify when initialization will occur.

c. Click Next.


Figure 50. Setting initialization options

13.On the Wizard Actions page, you specify when the subscription will be created, and whether the subscription configuration is saved in a script. We recommend that you select the check box for scripting so that you will have a copy of the replication configuration for future reference.

a. Select both check boxes.

b. Click Next.



Figure 51, 52. Generating the publication and script file

14.On the Complete the Wizard page, verify that all options are correct. Click Finish


Figure 53. Verifying wizard options

15.The New Subscription Wizard now saves the configuration information that you have entered and creates the subscription. Click Close after the steps are complete


Figure 54. Creating the subscription

16.After the wizard has completed, you can view the subscriptions you created in SQL Server Management Studio.

a. In Object Explorer, expand Replication.

b. Expand Publications.

c. Right-click the publication you created and click Refresh.

d. Expand the publication.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 781x372
Figure 55. Viewing the new subscription

Step VI. Monitoring the Publication and Subscription
This section of the article describes how to use Replication Monitor to monitor the publication and subscription you created.

1. In SQL Server Management Studio, expand Replication.

2. Expand Local Publications.

3. Right-click the Local Publications folder and then click Launch Replication Monitor.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 768x393
Figure 56. Starting Replication Monitor

Subscription status is displayed on the All Subscriptions tab in the right pane. The time it took for data to replicate from the Oracle Publisher to the Subscriber is listed in the Latency column, and a relative rating of this performance is listed in the Performance column. Because initial snapshots take more time to generate and deliver than incremental changes, the initial latency is typically much greater than the latency for incremental changes.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 793x379
Figure 57. Viewing subscription status in Replication Monitor

4.Latency between the Publisher and Subscriber is calculated by measuring two intervals in replication processing:

a. The time that is required from when a change is made at the Publisher until the Log Reader Agent delivers the change to the distribution database.

b. The time that is required for the Distribution Agent to deliver the change from the distribution database to the subscription database.

5.To view the details of the replication processing involved in these steps, you can double-click the subscription row in the right pane. The Distributor To Subscriber History tab shows the history for the selected Distribution Agent.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 697x558
Figure 58. Viewing Distribution Agent history

6.The Publisher To Distributor History tab displays the history for the Log Reader Agent.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 687x532
Figure 59. Viewing Log Reader Agent history

7.The Undistributed Commands tab displays information about the number of commands in the distribution database that have not been delivered to the selected Subscriber, and the estimated time to deliver those commands.

Close the dialog box and return to the main Replication Monitor interface.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 694x535
Figure 60. Viewing the number of commands in the distribution database

8.Tracer tokens are used to diagnose the current performance of transactional replication. A token, which is a small amount of data, is written to the transaction log of the publication database, marked as if it were a typical replicated transaction, and then sent through the system. The elapsed time is then measured.

You can create and monitor tracer tokens by using Replication Monitor.

a. In Replication Monitor, click the Tracer Tokens tab.

b. Click Insert Tracer.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 797x518
Figure 61. Adding a tracer token for a publication

9.After a short time, Replication Monitor displays three numbers as indicators of transactional replication performance: the time to replicate the tracer token from the publication database to the distribution database; the time to replicate the tracer token from the distribution database to the subscription database; and the total elapsed time. If one of the agents is stopped and the tracer cannot be replicated, Replication Monitor displays Pending until the agent is restarted.

a. Verify that a value is displayed in the Total Latency column.

b. Close Replication Monitor.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 796x367
Figure 62. Viewing elapsed time for the tracer token
__________________

Step VII. Verifying That Changes at the Publisher are.....
Step VII. Verifying That Changes at the Publisher are Replicated to the Subscriber

You have now successfully configured replication from SQL to SQL Server, and you have used Replication Monitor to verify the status and performance of the system.

If you created a transactional publication, you can make changes to data at the rep_2 db Publisher and then observe the successful replication of those changes to the SQL Server Subscriber.

To test replication, make changes to one or more published tables by using Transact-SQL command line statements. The example in the illustration updates one row in the info table

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 1024x734
Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 957x404
Figure 63,64. Making changes in the publish database

To verify that these changes are replicated, you can view the new data in the subscription database.

a. Open SQL Server Management Studio.

b. Click New Query and connect to the Subscriber.

Hình ảnh này đã được thay đổi kích thước. Click vào đây để xem hình ảnh gốc với kích thước là 1005x715
Figure 65. Verifying changes in the subscription database


Theo: TrungNghia
Credit: http://blog.csdn.net






  Trả lời ngay kèm theo trích dẫn này
Gửi trả lời


Công Cụ
Xếp Bài

Quyền Hạn Của Bạn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Hình Cảm xúc đang Mở
[IMG] đang Mở
Mã HTML đang Tắt




Bây giờ là 08:32 PM. Giờ GMT +7



Diễn đàn tin học QuantriNet
quantrinet.com | quantrimang.co.cc
Founded by Trương Văn Phương | Developed by QuantriNet's members.
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.